SmartMeter — IoT energy monitor
A clip-on electricity monitor that shows live kWh, warns about usage spikes and predicts the month’s CEB bill.
- සේවාදායකයා
- රහස්ය සේවාදායකයෙක්
- ස්ථානය
- [City]
- ක්ෂේත්රය
- Energy
- කාල සීමාව
- සති 8
[X%]
lower monthly electricity bill
[N]
boards monitored
8 wks
from prototype to installation
අභියෝගය
[Client] runs [N] premises and only saw electricity costs when the CEB bill arrived — a month too late to act. Nobody knew which machines or floors drove the peaks, and bills jumped every time a tariff block was crossed.
Off-the-shelf smart meters needed rewiring by an electrician and showed raw numbers that staff ignored.
අපගේ විසඳුම
We built a clip-on monitor: a split-core CT clamp around the incoming line, read by an ESP32 that sends readings every 10 seconds over MQTT. No rewiring — installation takes about 20 minutes per board.
A web and mobile dashboard shows live kWh, cost in rupees using the CEB tariff blocks, and a month-end bill forecast. An SMS goes out when usage spikes or the forecast crosses a budget the owner sets.
තාක්ෂණය
මෙවැනි ප්රතිඵල අවශ්යද?
ඔබේ ගැටලුව අපට කියා නොමිලේ ඇස්තමේන්තුවක් ලබා ගන්න.